High-speed ATCA compute blade fits the standard ATCA architecture and supports backplane switching. Single board contains 36-core CPU (single-core frequency up to 1200 MHz) as its powerful processing engine; onboard memory supports up to 32 GB. The blade is widely applied to high-speed computing, network acceleration, multimedia coding and decoding, mobile communications, etc.
High-speed ATCA compute blade integrates high performance network I/O, multi-core processing, specific processing instructions and high-capacity cache, thus providing highly effective solutions for network security, traffic monitoring, audio/video compression and decompression, high-speed computing and other businesses.
Features:
(1) Meet PICMG 3.0 and PICMG 3.1 specifications.
(2) 36-core CPU; single-core frequency up to 1200MHz; powerful processing engine.
(3) 64-bit CPU bus width; support floating-point operation.
(4) Transmit and receive packets at wire speed via embedded network-processor accelerator unit.
(5) Embedded hardware accelerator engines such as AES/DES for encryption and decryption and GZIP for compression.
(6) 1 XGE interface (SFP+).
(7) 8 GE interfaces (SFP)
(8) Capable of collecting and forwarding all-traffic data packets.
(9) Built-in CFAST and SATA hard disks for local storage of key data.
(10) 2 separate DDR3 memory controllers, supporting up to 32 GB memory.
(11) Maximum power consumption: 100W.
Specifications:
| 物理規格Physical Specifications | |
| 板卡標準：Standard of Interface Card | PICMG 3.1 |
| 工作溫度：Operating temperature | 0℃ ~ 45℃ |
| 相對溫度：Relative humidity | 5% ~ 90% |
| 內存Memory | |
| 緩存：Cache | 64 KB L1 cache per core (32 KB data and 32 KB instruction); 256 KB L2 cache per core |
| 最大內存支持：Maximum memory capacity | 32GB (support for up to 8 GB memory per slot) |
| 內存插槽數：Number of memory slots | 4 |
| 支持內存類型： Memory type | 2/4/8GB DDR3@1333MHz SODIMM |
| 網絡接口Network Interface | |
| 萬兆接口：XGE | 10Gbps Ethernet Interface (SFP+） |
| 千兆接口：GE | 8*1Gbps Ethernet Interface (SFP） |
| 控制接口Control Interface | |
| 串口：Serial port | RS-232 |
| 存儲Storage | |
| 內置設備Built-in device | CFAST and SATA hard disks |
| 電源Power | |
| 類型：Type | -48 V redundancy |
| 最大功耗Maximum power consumption | Typical configuration: 150W |
| 輸入范圍： Input range | 39.5 ~ 72VDC |
